Safety Information | Designated Use
8 | Doc. No. 982056, Version 01, SelectSun 40K
2 Safety Information
2.1
Designated Use
The SelectSun 40K inverter, also referred to in these operating instructions as the inverter, is a solar inverter,
which transforms the direct current generated by the PV generator (photovoltaic modules) into alternating
current and feeds this into the power supply network.
The 40K is connected as a transformerless inverter directly to the low voltage supply network.
The inverter has been constructed according to the current state of technology and in line with the rules of
technical safety.
Both inverters meet the requirements of degree of protection IP65 and can be used indoors and outdoors.
An agreement of the network operator for connection and operation of the inverter for low voltage network or
medium voltage network must be present.
The technical design of the network connection, the required additional electrical equipment and to the
applicable connection and installation conditions should be clarified in this regard in advance.
Any other use is not considered to be a designated use. The manufacturer accepts no liability for any
resulting from this.
2.2
Qualification of Personnel
Target group for these instructions are professionals who can assess the assigned tasks due to their
professional training, knowledge and experience as well as knowledge of the relevant provisions and
recognize possible dangers.
Electrical work must only be carried out by qualified electricians.
Only suitably trained and qualified personnel are allowed to work on this inverter. Personnel are regarded as
being qualified if they are sufficiently familiar with the assembly, installation, and operation of the product as
well as with all warnings and safety measures set out in these operating instructions.
