Selectronic 2000 EVO1, Руководство по установке

Страница: 10 / 20

EN
1 - DATE SETTING setting actual date
2 - DATE FORMAT setting date format according to territorial location
3 - DATE SEPARATOR setting date separation character
4 - TIME SETTING setting actual time in 24 hours’ format
5 - TIME CORRECTION enables fine tuning of internal clock of controller by this setting. If the clock is ahead or behind, the correction of daily difference measured in seconds
shall be set here
6 - SUMMER/WINTER TIME setting DST mode
Automatical: in this mode, time will automatically be adjusted at the time of official time change
Manual:
in this case, the operator shall perform DST in ’Time Setting’ menu
7 - CURRENCY setting currency to display zone costs
8 - ENERGY COST
unit price of energy calculated from fuel price and specific heat [EUR/kWh]
Calculation for oil: (unit price of oil [EUR/kg] / caloric power [MJ/kg]) * 3.6 [MJ/kWh]
Calculation for gas: (unit price of gas [EUR/m3] / caloric power [MJ/m3]) * 3.6 [MJ/kWh]
9 - LANGUAGE SELECTION setting of controller language
10 - PC KEYBOARD setting the layout of PC keyboard to be connected
11 - KEYBOARD BEEP switching keyboard beeps on/off when touched
12 - CONTROLLER INFO displays information relating to putting into operation and servicing of heating system and to controller itself
Service constact: displays contact data of servicing company
Next servicing: displays next date of service/supervision suggested by service company
Installation date: displays the date of putting into operation of heating system
10
Fig. 6: Main Menu System - page2