Selectronic 2000 EVO1, Руководство по установке

Страница: 4 / 20

EN
F
RONTPANEL
The unit includes the operating organs shown in figure (Fig. 1).
The operation shall be performed in the manner used by mobile phones: communication can be established with the device, navigation performed in menu system, setting
performed on basis of information displayed on the screen through function keys, direction keys, OK-button and Esc-button.
Esc-button can be used at any point of menu system to prevent unintentional or erroneous data modification.
1 - DISPLAY
colour display with backlight to show or visualise miscellaneous status information, parameters settled or any other function/information
2 - FUNCTION KEYS they have no permanent function, this is the text displayed on screen informing about their actual role (like for mobile phones)
3 -
DIRECTION KEYS
they enable navigation within information, menus or parameter settings displayed on the screen (like for mobile phones)
4 - OK BUTTON its main task is confirmation of information, or parameter settings
5 - ESC BUTTON
its main task is rejecting information, or parameter settings by returning to main screen
C
ONTROL
B
OARD
The panel is composed of control, signalling and connecting units shown in figure (Fig. 4A, 4B, 4C, 4D).
Wire connections can easily be performed by using dismantling terminal blocks and terminal block functions marked on panel by pictures if possible.
You shall not leave the box cover hanging on the flat multicore cable in any case! When installing, you shall provide a support to the box cover or have it removed by
disconnecting the easily dismantling line terminals!
1 - TERMINAL BLOCKS
see their detailed description and connections in next chapter
2 - RELAY LEDS signalling the status of corresponding relay
Lighting: the relay is energised
Not lighting: the relay is de-energised
3 - BATTERY it serves exclusively for power supply of internal clock permanently on even in case of power error, any other saved function / parameter setting will safely be
saved without battery and power supply, too
Concerning battery type, see technical data.
4 - FLATCABLE CONNECTOR
connector for frontpanel's flatcable
Y ou shall not leave the box cover hanging on the flat multicore cable in any case!
5 - SUPPLY LED LED signalling the presence of low voltage supply
6 - B1 FUSE fuse of low voltage part, for its value see the technical data
The LED lights in case of error of fuse.
7 - PC KEYBOARD
connecting of a standard PC keyboard by PS2 connection, which enables control to be set even more easily
8 - AUX.CONNECTOR serves for connecting auxiliary panels to the control unit
4
Fig. 4A: Control Board - EVO1
Fig. 4B: Control Board - EVO2