Selbit ISP-12F, Руководство пользователя

Страница: 31 / 33

www.selbit.pl
- 31 -
Using own created cutting programs (A, B C)
To call out the program press and hold A. B or C button. After calling out the proceedings
is the same like in case of the quick program.
Changes of the value in any positions during executing the actual program are not saved, there
are used only in the actual program thus after next call out the program is not changed.
CHAPTER 10
Operation recommendation
For having maximal good parameters of the cutting it is recommended to use auto-
calibration at least twice a week. Auto-calibration proceedings are in details described in the
point 3 of the chapter 3 “Auto-calibration (controller’s checking in with technical parameters
of the sawing frame machine where its mounted)”. Before starting of the operation the “Saw
Height” displayed needs to be checked and compared with the real head saw position. In case
of the any divergence it needs to be corrected according to the procedure shows in the point 4
of the chapter 3 “real saw height settings”.