Selbit ISP-12F, Руководство пользователя

Страница: 22 / 33

www.selbit.pl
- 22 -
Because of the changes of the sawing frame machine’s mechanical
parameters which depend on variety of factors such as temperature,
frictions factors etc. it is recommended to use auto-calibration at least
twice a week.
5 – Adjusting the height of the saw lift for the return movement Saw Up.
After pressing the “Saw Up” button, the ISP-12F adjuster lifts the saw over the cut
material to allows it to return safely to the beginning of the processed material.
The lifting height of the saw in normal mode can be modified as follows:
- Turn off the power supply of the adjuster and after approx. 3s, turn it on again.
- While the 12-F symbol is lit, press and hold the EXIT key.
- the “SAv” message appears on the upper display, while the lower shows the currently
entered value (default = 4).
- If you want the saw to move higher in normal mode, enter a different value between 1 and
100.
- Approve the new value by pressing the START button for a moment.