Sekonic SR-450, Руководство по эксплуатации

Страница: 64 / 75

S1
S2 S3 S4
Hopper
Paper feeding roller
DF sensor
Reader
Direction of card feeding
Cover open
11. Cleaning and Service Schedule
11-A Cleaning
Clean the rollers, reading lens and sensors since various malfunctions can occur if they are stained.
DF sensor 1
Slave rollers
DF sensor 2
Feeding rollers
Paper feeding roller
Paper ejecting sensor
Paper feeding sensor
Lens
11. Cleaning and Service Schedule
Warning
Do not spray any materials containing a inflammable gas or liquid on
the device and be sure to keep these kinds of materials away from
the device.
Use a cleaning cloth with a suitable amount of cleaning liquid to wipe
off well, after removing the power plug from the outlet and the device
has cooled off.
When doing maintenace, be sure to remove the power plug from
the outlet.
(1) Cleaning of rollers
After feeding 5,000 cards, a large amount of cards, or carbon paper, gently wipe the rollers
with a clean cloth slightly wetted with disinfectant alcohol (ethanol).
If the rollers are stained, the stains may rub off onto cards or a malfunction may occur.
(2) Cleaning of reading lens
Gently wipe the lens on the reader with a clean cloth slightly wetted with disinfectant
alcohol (ethanol). (Once a month or after every 5,000 card feeding.)
If the reading lens is stained, a reading error may occur.
(3) Cleaning of various sensors
Gently wipe the sensor part with a clean cloth containing a little diluted alcohol sanitizer (ethanol).
(Once a month or after every 5,000 card feeding.)
Adhesion of dirt (such as paper dust) on the sensor part causes erroneous detection.
* Diluted alcohol sanitizer is the ratio of alcohol (ethanol) 1 to tap water 5.
- 52 -