6
COLPOSCOPE ASSEMBLY
The correct position of the Binoculars to the Colposcope
Align the guide-pin to the groove, adjust the base of the Binoculars to point the flange, and tighten the set screw.
Finally check if the Binoculars are well secured and do not move.
The Binoculars Eyepieces
The eyepieces are mounted to the binocular housings, as shown in the illustration. Make sure that they are well seated.
The Eye Protectors
The Eye Protectors are threaded to the Binoculars as shown in the figure 9. The Eye Protectors protect the eyes,
prevent the intake of lateral lights and create a suitable darkroom to the observer.
Precautions
The Binoculars contain optical parts internally that cannot be cleaned without disassembly.
It is therefore advisable to keep the eyepieces inserted in the eye tubes at all times in order to keep impurities from
getting inside the housing. It is recommended that if the eyepieces are removed, a clean cloth be placed over the
openings.
t
Step 1
Place post into base with pin in
base, lined up with notch in post.
Step 2
Install bolt and tighten securely
with Allen wrench (provided).
t
t
Step 3
Place arm into pole.
t
Step 4
Install extension arm by pulling
plunger and inserting into
Pantographic arm.
Plunger
t
Step 5
Install Optic Pod into the
extension arm.
