13
8. DISINFECTION
8.1 DISINFECTING THE UNIT
NOTE: Always disconnect the power cord before cleaning the system.
Use any disinfectant agents which are commonly applied while disinfecting surfaces of electric medical equipment. Such
disinfectant agents are usually in the form of sprays or damp cloths.
Follow the instructions given by the manufacturer of the disinfectant solution.
9. SERVICING AND REPAIR
Defective items of equipment are to be serviced and repaired exclusively by persons authorized by the manufacturer. All
repair work shall employ original manufacturer’s parts only.
9.1 FUSE REPLACEMENT
CAUTION:
Always disconnect power cord and turn main switch off before fuse replacement.
Turn light source off and unplug power cord. On back of unit remove fuse by turning fuse cover and pulling out fuse.
Replace fuse with 2 AMP (1/4” x 1 ¼”) time delay 250V rated fuse. Insert back into fuse housing.
Re-connect the power cord and turn the LED light source on according to section 6.1.
9.2 LIMITED WARRANTY
Your LED light source carries a 1-year warranty from the date of shipment on workmanship and all defects of materi-
al, excluding replaceable sweatbands, headband, fiberoptic cable and lamps. Should your product prove to have such
defects within one year of the shipment. Seiler Instrument will repair or replace the product or component part without
charge. Should your LED Light Source product(s) need servicing under this warranty, please contact, Seiler Instrument
return authorization documentation. You should carefully pack unit in a sturdy carton and ship it to the factory. Please
include a note describing the defects, your name, telephone number and a return address. Warranty does not cover
equipment subject to misuse, accidental damage, normal wear and tear or if transferred to a new owner without autho-
rization from Seiler Instrument. This warranty gives you specific legal rights and you may also have other rights that vary
from state to state.
POST WARRANTY REPAIRS: You may return your product(s) for repair, shipping prepaid to the factory. Your product will
be inspected and an estimate of repair charges will be submitted to you for approval. Payment must be received before
repairs are completed.
• In the US: 800-489-2282 (toll free)
• FAX number: 314-968-3601
• Customer Service: 314-218-6336
