background image

8

OPTICAL AND FIELD MAGNIFCATION TABLE

CLEANING

TROUBLESHOOTING TIPS

The optical magnifications achieved with the Colposcope are determined by 3 variables: the objective focal distance, the 
position of the Magnification Selector and the by 
eyepiece used.

The table shows the optical magnification and the observed field diameters, in millimeters, depending on those 
variables. At the bottom line of the table the illuminated field is shown, corresponding to the light disk incident on the 
field, with a diameter that depends only on the focus of the work objective.

The magnification selector has 6 positions: 1, 2, 3, 4, and 5. The 3 position is repeated in the selector. The working 
position is the one aligned to the red dot mark.

The Objective, pointed to the field under clinical or surgical treatment, is exposed to blood and other bodily fluids. Spots 
on the objective dim the passage of the light.  Stains blur the light, reducing the luminosity of the optical observation.

Cotton padding wetted in alcohol rubbed softly, in CIRCULAR MOVEMENTS over the optical surface, is enough to clean 
the stains, except those of clotted blood. Clotted blood shall be cleaned with cotton and hydrogen peroxide.
 
If the eyepieces are too dirty, change the cotton at each circular friction motion to avoid spreading out the dirt.
 
On the other hand, there is an effective protector for the objective, fitted under pressure at the outer edge of the lens 
which protects the objective against “splatter” and contamination.  
 
To have the eyepieces and objective well cleaned for clinical use, it is sufficient to use cotton.
 
The metallic parts (chrome-plated or painted) can be cleaned with cotton and alcohol.

ELECTRIC CONNECTIONS
 

Ensure that none of the following are present:

 

Broken wires inside the cable.

 

Loose wires at the connector.

 

Broken wires at the fixation, inside the connector.

 

Oxidized connectors terminals.

Magnifica(on

Field

Magnifica(on

Field

Magnifica(on

Field

Magnifica(on

Field

Magnifica(on

Field

1(0.4)

3.89

46.32

3.40

52.94

2.72

66.18

2.27

79.41

1.70

105.88

2(0.6)

5.83

30.88

5.10

35.29

4.08

44.12

3.4

52.94

2.55

70.59

3(1.0)

9.71

18.53

8.50

21.18

6.80

26.47

5.67

31.76

4.25

42.35

4(1.6)

15.54

11.58

13.60

13.24

10.88

16.54

9.07

19.85

6.80

26.47

5(2.5)

24.29

7.41

21.25

8.47

17.00

10.59

14.17

12.71

10.63

16.94

1(0.4)

4.86

41.18

4.25

47.06

3.40

58.82

2.83

70.59

2.13

94.12

2(0.6)

7.29

27.45

6.38

31.37

5.10

39.22

4.25

47.06

3.19

62.75

3(1.0)

12.14

16.47

10.63

18.82

8.50

23.53

7.08

28.24

5.31

37.65

4(1.6)

19.43

10.29

17.00

11.76

13.60

14.71

11.33

17.65

8.50

23.53

5(2.5)

30.36

6.59

26.56

7.53

21.25

9.41

17.71

11.29

13.28

15.06

1(0.4)

6.22

41.18

5.44

47.06

4.35

58.82

3.63

70.59

2.72

94.12

2(0.6)

9.33

27.45

8.16

31.37

6.53

39.22

5.44

47.06

4.08

62.75

3(1.0)

15.54

16.47

13.60

18.82

10.88

23.53

9.07

28.24

6.80

37.65

4(1.6)

24.87

10.29

21.76

11.76

17.41

14.71

14.51

17.65

10.88

23.53

5(2.5)

38.86

6.59

34.00

7.53

27.20

9.41

22.67

11.29

17.00

15.06

Magnifica(on   Table   for   985

Binocular   Head   Focal   Length:   F=170mm

   Eyepiece

Posi(on   of   

BuNon

Objec(ve   Lenses

175

200

250

300

400

90

108

144

10X/18

12.5X/16

16X/16

Illuminated   Field

65

72

Содержание Coolscope 985 LED

















Отзывы: