I‑5039
26
13 APPLICATION (6):
AUTOMATIC CROSSOVER COUNTING MODE
DOWNCOUNTING→ZERO (0) CROSSING ZERO WITHOUT STOP→UPCOUNTING
(１) Initial settings
1) Set the FUNCTION switch at 00 .
2) Set the POWER switch to ON.
3) Set the slide switches as shown at right.
(2) Time setting
[Ex.] 2m10s
(
RANGE switch setting: 1)
1) Give a push to the FUNCTION switch.
2) Press the FIGURE switch three times further, and you
will be stepped three places rightwards to 1s digit
(= 1s digit of minutes).
3) Press the 0-9 switch two times.
4) Give a push to the FIGURE switch, and you will be stepped
one place to the right.
5) Give a push to the 0-9 switch.
6) Press the SET switch.
(The sports timer will not start unless the SET
switch is pressed.)
(3) Operation and display
1) Press the START/STOP switch, and the sports timer will
start counting.
2) Countdown
Every time the START/STOP switch is pressed, the sports timer
will start and stop downcounting alternately.
3) Just when the time is counted down to 0 , the buzzer will beep,
and at the same time, downcounting mode is automatically changed
over to upcounting mode.
4) The sports timer will be initialized by pressing the LAP/SPLIT/
RESET switch when the sports timer is at a standstill.
②
①
④
⑤
⑥
③
①
②
1 second
later
The buzzer
sounds
③
④
RANGE
COUNT
REPEAT
MEMORY
BUZZER
DｌSPLAY
MAX TｌME
FｌGURE
0〜9 SET
READ
OFF
ON
PUSH
BATT.CHECK
POWER
1 1/10 1/100
UP DOWN D→U
OFF ON
LAP SPRIT
OFF 1 5
OFF AUTO ON
99h 24h Time
FUNCTｌON
0
0
Set the RANGE switch to
determine the minimum
indicating unit
D→U
ON
Set the MEMORY switch
to LAP time or SPLIT
time
Set the BUZZER switch
to 1 or 5 if it is required
to activate the buzzer
The sports timer display
is enabled irrespective of
the DISPLAY switch
position
Set the MAX TIME switch
to determine the
maximum limit of time
display.
Set the FUNTON switch at
“
0
”