I‑5039
18
7
SETTING OF FUNCTION SWITCH
This is a two-digit switch used to select a function number for a specific application.
Note:
To change the FUNCTION switch setting (function number), turn off the POWER switch first, change the
FUNCTION switch setting, and then turn on the POWER switch again. The FUNCTION switch is disabled
while the MODEL ST-306 is in operation. The MODEL ST-306 will not work when the FUNCTION switch is
set at any number other than specified as effective in the list on page 42.
Confirmation of FUNCTION switch setting (function number)
[Ex.] When the FUNCTION switch is set at xx :- (x: 0-9)
1) Set the POWER switch to ON.
2) The entire display will be blacked out.
3) The function number which has been set will be displayed preceded
by code F- for 1 second. ( F-xx ) ( F-00 in the illustrated example)
4) The MODEL ST-306 will operate as directed by a specific combination
of the parameter settings of the switches.
Where a function number not appearing on the function number list (p. 42) is set:-
[Ex.] When the FUNCTION switch is set at 18 :-
1) Turn ON the POWER switch.
2) The entire display will be blacked out.
3) The function number which has been set will be displayed
preceded by code F- . ( F-xx ) ( F-18 in the illustrated example)
4) The display will freeze at F-xx .
5) Turn off the POWER switch, correct the FUNCTION switch setting, and then turn ON the POWER
switch again.
0 0
FUNCTlON
upper
digit
Lower
digit
Minus button
Plus button
①
②
③
④
①
②
③