I‑5039
23
10 APPLICATION (3):
DOWNCOUNTING MODE
DOWNCOUNTING (COUNT DOWN)
Display of: Game time
(1) Initial settings
1) Set the FUNCTION switch at 00 .
2) Set the POWER switch to ON.
3) Set the slide switches as shown
at right
(2) Time setting
[Ex.] 20m00s0
(When the RANGE switch is set at 1/10.)
1) Give a push to the FIGURE switch.
2) Press the 0-9 switch two times.
3) Press the SET switch to save the setting. When
the SET switch is pressed, each of the digits to
the right of the digit in which numerical data is
entered last will be set to 0 .
*To set two digits or more, repeat the steps 1) and 2),
and press the SET switch when all the required digits have been set
.
(3) Operation and display
1) Press the START/STOP switch to start downcounting.
2) Press the START/STOP switch to bring the sports timer
to a pause.
Every time the START/STOP switch is pressed,
the sports timer will start and stop downcounting alternately.
The sports timer will display time according to the RANGE
setting.
3)
At once
the time is counted down to 0 , the buzzer
will beep.
4) To repeat the downcounting from the same preset time,
press the LAP/SPLIT/RESET switch, and press the
START/STOP switch. The sports timer will display time
according to the RANGE setting
②
①
③
②
④
①
1
second
later
③
The buzzer
sound
RANGE
COUNT
REPEAT
MEMORY
BUZZER
DｌSPLAY
MAX TｌME
FｌGURE
0〜9 SET
READ
OFF
ON
PUSH
BATT.CHECK
POWER
1 1/10 1/100
UP DOWN D→U
OFF ON
LAP SPRIT
OFF 1 5
OFF AUTO ON
99h 24h Time
FUNCTｌON
0
0
Set the RANGE switch to
determine the minimum
indicating unit
DOWN
OFF
The MEMORY switch is
disabled irrespective of
its position
Set the BUZZER switch
to 1 or 5 if it is required
to activate the buzzer
The sports timer display
is enabled irrespective of
the DISPLAY switch
position
Set the MAX TIME switch
to determine the
maximum limit of time
display.
Set the FUNTON switch
at
“
0
”