I‑5039
24
11 APPLICATION (4):
REPETITIVE DOWNCOUNTING MODE
REPETITIVE DOWNCOUNTING (DOWN)
(1) Initial settings
1) Set the FUNCTION switch at 00 .
2) Set the POWER switch to ON.
3) Set the slide switches as shown
at right
(2) Time setting
[Ex.] 4m30s
1) Give a push to the FUNCTION switch.
2) Press the FIGURE switch three times, and 0 will be
stepped three places to the right.
3) Press the 0-9 switch 4 times.
4) Give a push to the FIGURE switch, and you will be
stepped to the next digit (10s digit of seconds here).
5) Press the 0-9 switch three times.
6) Press the SET switch.
(Unless the SET switch is pressed, the sports timer
cannot be readied for downcounting.)
(3) Operation and display
1) Press the START/STOP switch, and the sports timer
will start downcounting.
2) The downcounting will be repeated cyclically unless the
START/STOP switch is pressed.
(When the START/STOP switch is pressed, the sports timer
will be brought to a pause.)
Every time 0 is reached, the buzzer will beep.
3) Pressing the LAP/SPLIT/RESET switch while the sports timer
is at a pause will initialize the sports timer.
①
②
③
1 second
later
The buzzer
sounds
②
①
④
⑤
⑥
③
RANGE
COUNT
REPEAT
MEMORY
BUZZER
DｌSPLAY
MAX TｌME
FｌGURE
0〜9 SET
READ
OFF
ON
PUSH
BATT.CHECK
POWER
1 1/10 1/100
UP DOWN D→U
OFF ON
LAP SPRIT
OFF 1 5
OFF AUTO ON
99h 24h Time
FUNCTｌON
0
0
Set the RANGE switch to
determine the minimum
indicating unit
DOWN
ON
The MEMORY switch is
disabled irrespective of
its position
Set the BUZZER switch
to 1 or 5 if it is required
to activate the buzzer
The sports timer display
is enabled irrespective of
the DISPLAY switch
position
Set the MAX TIME switch
to determine the
maximum limit of time
display.
Set the FUNTON switch at
“
0
”