Version: 02/02/05 Page 8 of 22
Main Objects
•
Global Max Power (R/W)
•
Global Port Detection (R/W)
•
Trap Destination IP Address (R/W)
•
Trap Re-Transmission Period (R/W)
•
Allocated Power Threshold (R/W)
•
Total Power Delivered (R)
•
Total Available System Power (R)
•
Network Controller Firmware Version (R)
•
System Controller Firmware Version (R)
•
Total Power Allocated (R)
•
Main System Voltage (R)
•
Main System Temperature (R)
SNMP Security
The “Get Community” and “Set Community” default values are “public” and “private”
respectively. These can be changed via the RS232 interface using the “snmp config”
command.
To change the get and set values use the following procedure:
•
Connect your computer to the Juice Box via the RS232 interface using a standard serial
cable.
•
Start up the terminal adapter program.
•
Press the Enter key, type “snmp status”, (case insensitive), then press the Enter key
again.
•
The current Juice Box SNMP settings will be displayed.
•
Type “snmp config”, then press the Enter key. The system will respond with “ENTER
SNMP GET COMMUNITY”. (If you make a mistake you can hit the “Backspace” key
then re-enter the character.)
•
Enter the “Get Community” value, then press the Enter key. The system will respond
with “ENTER SNMP SET COMMUNITY”.
•
Enter the “Set Community” value, then press the Enter key. The system will respond
by displaying the entered values
