Version: 02/02/05 Page 16 of 22
16. Network Controller Firmware Update
1.
If you have not done so already connect the Juice Box to your network and make sure
the Juice Box network settings are compatible with your computer. (See Network
Settings).
2.
Go to the SEI WEB page,
www.seipower.com
. Click on the “Power over Ethernet”
link, then click on “Firmware Download”. This will down load a ZIP file containing
the most recent Network RAM Loader Firmware, (JBRLVx_x.bin), and Network
Controller Firmware, (JBNetCntlVx_x.bin). Save the ZIP file to a temp directory and
extract the bin files.
3.
Insert the Juice Box CD into your CD drive.
4.
Using Explore, look at the contents of the CD.
5.
Open the “Network Controller Firmware Update” directory and copy the
UDPDownload.exe and UDPDownload.ini files to the same temp directory as in step 2
above. Double click on the UDPDownload.exe file. This will start the “Network
Controller Firmware Update” utility.
6.
When the program is started it will search for all Juice Boxes on your network and list
them in the Board List/Status window. You can also do a manual search by clicking on
Search in the tool bar.
7.
Select the Network RAM Loader firmware file you downloaded in step 2 in the RAM
Loader selection window.
8.
Select the Network Controller firmware file that you downloaded in step 2, in the User
Program window.
9.
Click on Download in the tool bar.
10.
Select the Juice Box IP address(es) to be updated and click on OK. The update utility
will install the new firmware, restart the Juice Box(es) Network Controller(s), and re-
scan all Juice Boxes on the network so you can visually verify that the firmware has
been updated in each unit.
11.
Exit the program when completed.
17. System Controller Firmware Update
1.
Connect the Juice Box to your computer via the RS232 interface using a standard serial
cable.
2.
Insert the Juice Box CD into your CD drive.
3.
Using Explore, look at the contents of the CD.
4.
Open the “System Controller Firmware Update” directory and double click on “setup”.
This will install the “System Controller Firmware Update” utility.
5.
When the install screen appears click on the “Install” button. On the next screen click
on “Continue” button.
6.
Follow any necessary prompts and when the setup has completed, click on “OK”.
