Segger Flasher ATE, Руководство пользователя

Страница: 32 / 104

32 CHAPTER 3 Setting up Flasher ATE for handshake mode
3.2 Setting up Flasher ATE for handshake mode
In order to set up the Flasher ATE for the handshake mode it needs to be configured once
using the J-Flash software. For more information about J-Flash, please refer to the J-Flash
User Guide .
Please follow the steps in chapter Setting up Flasher for remote-controlled mode on page 30
first.
In addition you have to tell the Flasher ATE which project shall be programmed. Therefore
you can directly edit the FLASHER.ini file in each modules folder, or connect to the Flasher
ATE and use the “#select” command.
The
FLASHER.ini
file might look like as follows if your project is named MyTest:
[FILES]
DataFile = "MyTest.DAT"
ConfigFile = "MyTest.CFG"
From now on, the Flasher ATE can be used in stand-alone mode (without host PC interaction)
for stand-alone programming.
Flasher ATE User Guide (UM08035) © 2017-2018 SEGGER Microcontroller GmbH