Segger Flasher ATE, Руководство пользователя

Страница: 19 / 104

19 CHAPTER 2 Setting up the IP interface
2.2 Setting up the IP interface
The Flasher ATE comes with an additional Ethernet interface to communicate with the host
system. The Flasher ATE has a built-in webserver which allows some basic setup of the
emulator, e.g. configuring a default gateway which allows using it even in large intranets.
2.2.1 Connecting for the first time
When connecting Flasher ATE for the first time, it attempts to acquire an IP address via
DHCP. The recommended way for finding out which IP address has been assigned to Flasher
ATE is to use the J-Link Configurator. The J-Link Configurator is a small GUI-based utility
which shows a list of all emulators that are connected to the host PC via USB and Ethernet.
For more information about the J-Link Configurator, please refer to
UM08001_JLink.pdf
(J-
Link / J-Trace user guide), chapter Setup , section J-Link Configurator .
The picture shows the J-Link Configurator with the detected Flasher ATEs. Select the one
you want to configure.
You may configure your Flasher ATE to use your preferred IP setting. This is done by se-
lecting the Flasher ATE in the list, opening the context menu with a right click on the list
entry, and choosing Configure from the context menu. Enter your required IP settings in
the dialog box that opens up, e.g. as shown in the next picture. Confirm the IP settings
by pressing OK.
Flasher ATE User Guide (UM08035) © 2017-2018 SEGGER Microcontroller GmbH