Segger Flasher ATE Скачать руководство пользователя страница 24

Страница: 24 / 104

CHAPTER 2

LED status indicators

2.4 LED status indicators

The Flasher ATE uses different LEDs, see the following tables.

2.4.1 Mainboard LED indicators

Status of mainboard LEDs

Meaning

USB

GREEN

high frequency blinking

(~ 10Hz)

The mainboard is waiting for USB enumeration. As

soon as USB has been enumerated, the green LED

stops flashing and is switched to constant green.

USB GREEN

constant

The mainboard has completed USB enumeration or

no USB connection present.

USB RED

constant

The mainboard is in bootloader mode.

READY/BUSY

GREEN

No operation, the Flasher is ready.

READY/BUSY

RED

Flashing operation in progress on at least one mod-

ule.

PASS/ERROR

GREEN

The last operation was successful on all modules.

PASS/ERROR

RED

The last operation has failed on at least one mod-

ule.

VMAIN

GREEN

VMAIN is used as module power supply.

VUSB

GREEN

VUSB is used as module power supply

The VUSB LED does not work on mainboards hardware version 1.0. This has no influence

on functionality.

2.4.2 Module LED indicators

LED

Status

Meaning

STATUS GREEN

short flashing

The module waits for a start trigger.

STATUS

GREEN

slow blinking

Flashing operation in progress:

• Erasing (blinking at 6.25 Hz)

• Programming (blinking at 1.67 Hz)

• Verifying (blinking at 5 Hz)

STATUS

RED

constant

a) The module is in bootloader mode.

b) The last operation has failed.

GREEN

Internal power supply for 5V is working.

3.3V

GREEN

Internal power supply for 3.3V is working.

VCC5V

GREEN

Target power is enabled via internal supply.

VTGT

GREEN

Target power is enabled via external supply.

Flasher ATE User Guide (UM08035)

Содержание Flasher ATE









































































































Результаты поиска

Содержание Flasher ATE

Отзывы:

Бренды по названию

Популярные бренды

Segger Flasher ATE, Руководство пользователя

Результаты поиска

Содержание Flasher ATE

Отзывы:

Бренды по названию

Популярные бренды