Sega Ghost Squad Deluxe Скачать руководство пользователя страница 47

Страница: 47 / 150

5.1. SYSTEM TEST MODE

•

Any settings that are changed by users during TEST MODE are saved upon

exiting TEST MODE with the EXIT command in the SYSTEM MENU. If the
unit is powered off prior to exiting, changes to settings will not take effect.

•

You may not enter GAME TEST MODE while the unit is reading from or

checking the GD-ROM. If error messages are displayed when exiting TEST
MODE, you should power the unit off and on again.

•

In the manual for this product, "Media Board" and "DIMM" are one and the

same.

•

Use with the specified settings. If settings other than those specified are

used, inappropriate operations or malfunction may occur.

5.1.1. SYSTEM TEST MENU MODE

System Test Mode can be used to check that the main circuit operations are correct, adjust Monitor colour,
and perform coin/credit settings.
However, this product can only be used with the settings shown below.

SOUND

TEST

- OUTPUT TYPE: STEREO

COIN

ASSIGNMENTS

- COIN CHUTE TYPE: COMMON

- SERVICE TYPE: COMMON

1. Press the TEST Button after powering on the unit to display the following SYSTEM MENU.

2. Press the SERVICE Button to move the cursor to the desired test item.

3. Move the cursor to the desired item and press the TEST Button to display each test

screen.

4. Move the cursor to ENTER GAME TEST and press the TEST Button to enter the individual

test menus for each game. Refer to "9-3 GAME TEST MODE".

5. When testing is complete, move the cursor to EXIT and press the TEST Button. The game

advertisement screen should be displayed.

Содержание Ghost Squad Deluxe























































































































































Результаты поиска

Содержание Ghost Squad Deluxe

Отзывы:

Бренды по названию

Популярные бренды

Sega Ghost Squad Deluxe, Руководство по обслуживанию

Результаты поиска

Содержание Ghost Squad Deluxe

Отзывы:

Бренды по названию

Популярные бренды