Sega Ghost Squad Deluxe, Руководство по обслуживанию

Страница: 11 / 150

10
3. ASSEMBLY AND INSTALLATION
•
Perform assembly work by following the procedure herein stated. Failing to
comply with the instructions can cause electric shock hazard.
•
Perform assembling as per this manual. Since this is a complex machine,
erroneous assembling can cause an electric shock, machine damage and
or not functioning as per specified performance.
•
When assembling, be sure to use plural persons. Depending on the
assembly work, there are some cases in which working by one person
alone can cause personal injury or parts damage.
•
Ensure that connectors are accurately connected. Incomplete connections
can cause electric shock hazard.
•
Be careful not to damage the wires. Damaged wires may cause electric
shock or short circuit or present a fire risk.
•
Do not carelessly push the PTV. Pushing the PTV carelessly can cause
the PTV to fall down.
•
This work should be performed by the site maintenance individual or other
skilled professional. Performing work by non-technical personnel can
cause a severe accident such as electric shock. Failing to comply with this
instruction can cause a severe accident such as electric shock to the player
during operation.
•
Provide sufficient space so that assembling can be performed. Performing
work in places with narrow space or low ceiling may cause an accident and
assembly work to be difficult.
•
To perform work safely and avoid serious accident such as the cabinet's
falling down, do not perform work in places where step-like grade
differences, a ditch, or slope exist.
•
Do not use this product with connectors other than those that were
connected and used with the Game Board at the time of shipping. Do not
carelessly connect wires to connectors that were not used at the time of
shipping, as this may cause overheating, smoke or fire damage.
•
When handling plastic parts, use care. Do not give a shock or apply
excessive load to the fluorescent lamps and plastic parts. Failure to
observe this can cause parts damage, resulting in injury due to fragments,
cracks and broken pieces.
•
To perform work safely and securely, be sure to prepare a step which is in
a secure and stable condition. Performing work without using the step can
cause violent falling down accidents.
•
Make sure that the GD cable connector is inserted parallel to the plug.
Improper insertion may cause damage to the connector and present a fire
risk.