Sega Ghost Squad Deluxe Скачать руководство пользователя страница 105

Страница: 105 / 150

104

Error 11

[DISPLAY] Error

JVS I/O board is not connected to main board.

[CAUSE]

(1)I/O BOARD is not connected.

(2)Unreliable connection between MAIN BOARD

and

I/O

BOARD.

[COUNTERMEASURES] (1)Connect

the

I/O BOARD to the MAIN BOARD.

Verify that the power cable is connected to I/O BOARD.

(2)Reconnect or replace the JVS CABLE that connects

the I/O BOARD to the MAIN BOARD.

Error 12

[DISPLAY] Error

JVS I/O board does not fulfil the game spec.

[CAUSE]

Correct I/O BOARD is not connected.

[COUNTERMEASURES]

Use an I/O BOARD that provides the proper input/output for the

game.

Error 14

[DISPLAY]

Error 14

Network firmware version does not fulfil the game Spec.

Required

version

XX.XX.

[CAUSE]

The firmware version installed on either the NETWORK BOARD or

the DIMM MEDIA BOARD is older than the required version.

[COUNTERMEASURES]

Use a NETWORK BOARD or DIMM MEDIA BOARD with firmware

that meets or exceeds the required version.

Error 21

[DISPLAY] Error

This game is not acceptable by main board.

[CAUSE]

Game data loaded from the GD-ROM to the DIMM BOARD is

corrupted.
[COUNTERMEASURES]

Verify the GD-ROM DRIVE and Chihiro connection.

Check the GD-ROM disc for scratches, dust or dirt.

Error 22

[DISPLAY] Error

Communication error occurred between main board and media

board.
[CAUSE]

No response from DIMM BOARD to MAIN BOARD.

[COUNTERMEASURES]

Ensure that the DIMM BOARD and the GD INTERFACE BOARD

are properly connected.

Should the problem persist, the DIMM BOARD or GD INTERFACE

BOARD may be damaged.

Error 23

[DISPLAY] Error

GD-ROM drive cover is open.

[CAUSE]

The GD-ROM DRIVE cover is open.

[COUNTERMEASURES]

Ensure the GD-ROM DRIVE cover is firmly closed.

Содержание Ghost Squad Deluxe























































































































































Результаты поиска

Содержание Ghost Squad Deluxe

Отзывы:

Бренды по названию

Популярные бренды

Sega Ghost Squad Deluxe, Руководство по обслуживанию

Результаты поиска

Содержание Ghost Squad Deluxe

Отзывы:

Бренды по названию

Популярные бренды