43
08/2020
7 TROUBLESHOOTING
DANGER!
•
Never connect the device to the power supply if the device,
the power cord or the mains plug are visibly damaged.
•
In case of danger or in case of a defect, pull the mains plug
immediately out of the socket.
•
Never try to repair the device yourself. If your device does not
work properly, contact the retailer from where you purchased
the device.
•
If the power supply cord is damaged it may only be replaced
by the manu f acturer or by a manufacturer-authorized after-
sales service or by a qualifi ed specialist (electrical engineer) to
avoid hazards.
•
Never operate a defective device.
•
Never operate a device that has fallen down.
If failures occur during operation, please check the following table to see if you can solve the
problem yourself. All other repairs are prohibited and the warranty is void.
Problem
Cause
Action
Device will not switch on.
Device is not connected to
the power supply.
Plug the mains plug into a
socket outlet with earthed
contact.
Coff ee does not fl ow out of
the outlet (drip-stop).
Coff ee pot is not placed
correctly under outlet.
Check that the coff ee pot is
placed correctly on the hot
plate and that it presses up the
valve in the outlet.
Coff ee is too watery.
Not enough ground coff ee.
Check the dosage table, see
chapter 5 – OPERATION.
There are coff ee residues
in the coff ee pot.
Paper fi lter over loaded, not
correctly inserted, or not
inserted at all.
Follow the operation
instructions, see chapter 5 –
OPERATION.
Содержание CM 109B
Страница 47: ...47 08 2020 ...
