SEQUENCER CONTROLLER
WITH OR WITHOUT
DIFFERENTIAL PRESSURE MEASUREMENT
Technical Notice
FI 72.0308.0316E
Page 2 sur 15
- 2 -Page 2 sur 15
- 2 - - 2 -
- 2 -
- 2 -
SUMMARY:
DESCRIPTION :
The SDS3 is a sequencer for the command and control of dust-
removal equipment.
It can be equipped of the differential or relative pressure measure
(pressure drop).
It is equipped with a T1 time (pulse time), a T2 time (rest/idle), a
T3 time (rest time between two cycles), a T4 time which performs a
cleaning cycle if the sequencer has not operated for a set number of
hours, a manual running, an electrical fault control, a possibility to
execute a preset number of cycles at fan stop, three pilots for
pneumatic valves.
In option, it can be equipped of a relay output for fault or alarm
report of information and of a loop control input (I1: fan or other).
If the device is equipped of the pressure measure, it is equipped
with a loop control to DP measure (2 thresholds), two
P alarms
(high and low), a
P threshold for accelerated cycle, a T2A time
(accelerated idle time).
The device is adjustable depending on the use.
All the operating parameters are adjustable through sensitive keys
on the front.
The value of each parameter and the pressure are displayed on a
LED display.
Comment: this data sheet is drawn up on the basis of a device
equipped with the pressure drop measure. If the device is not
equipped with the pressure drop measure, the functions relating
to this are not validated. The options on the device, define the
terminal board and the Glands configurations.
The information concerning the device equipped with the
pressure measure are in grey colour.
Page
- DESCRIPTION
2
- CHARACTERISTICS
3
- PRESENTATION OF THE
FRONT PANEL
4
- PRESENTATION OF THE
KEYBOARD
4
- ADJUSTMENTS &
RUNNING
- HIDDEN MENU
5
10
- THE SIGNALLING IN
FRONT PANEL
10
- CONTROL / FAULTS
DISPLAY
11
- CONNECTIONS
11
- SPARE REQUIREMENT
AND FIXING
- RELAY OUTPUT
12
13
- PRECAUTIONS
13
- CALIBRATION
13
- SPECIFICITIES
AVAILABLE ON REQUEST
13
- GENERAL
INSTRUCTIONS FOR
SAFETY, ASSEMBLY,
COMMISSIONING, AND
MAINTENANCE
14
- WARRANTY
15
- CONFORMITY
15
