SEFAM PolyLink, Процедура установки и использования

Страница: 10 / 20

10

Use PolyLink kit
CAUTION:
The Bluetooth Low Energy wireless connection must be enabled for acquisition of signals from the
effort/position kit.
Views of the display:
Tap the touch
key
Communication with the PolyLink effort/position
kit
The S.Box device searches the PolyLink
effort/position kit and the BLE display flashes
alternately with six dashes as long as no kit is
paired.
When the kit is detected, the BLE display flashes
alternately with the last six alphanumeric
characters of the Bluetooth address indicated on
the rear side of the kit, as shown in
the example.
If the 6 characters displayed do not match the
PolyLink effort / position kit used, a new search is
possible by tapping the key or .
Status menu
This menu is available from the firmware version 1.7 of the S.Box device. It is accessible when the
S.Box device is in operation and when a PolyLink system or a pulse oximeter WristOx2 has been
installed and paired. The information can be viewed successively
but cannot be modified.
To access it, tap the touch button when the S.Box device is on.
❶
Tap the touch
button
when the device
is in operation.
SD card status
Possible displays: SD: OK and SD: _ _ _.
If SD: _ _ _.is displayed, check that the SD card is
present and properly inserted in the memory card
slot.
❷
Tap the touch
button
Status of the pulse oximeter
Possible displays: SPO: OK and SPO: _ _ _.
If SPO: _ _ _ is displayed, check that the oximeter
sensor has been properly installed and the
communication with the oximeter is correct.