SEFAM PolyLink, Процедура установки и использования

Страница: 9 / 20

PolyLink kit Use  9
WARNINGS:

It is recommended to wear night clothing.

Do not leave unnecessary lengths of belts on the bed.
They could wrap around your head or around your neck
when you are asleep.
Figure 5 –General diagram of kit and sensors position
Recharging the internal battery of the kit
1. Connect the USB power cord of the charger to the corresponding port of the effort / position kit.
2. Plug the USB charger into the electrical power grid.
3. Keep the kit plugged until the internal battery is recharged and the LED becomes green.
Use
Operation configurations
The PolyLink kit has two operation configurations:
 The PolyLink effort/position kit transmits the signals of thorax and abdomen efforts, as well as
the patient's body position, to the PolyLink module for S.Box. Electromagnetic disturbances may
temporarily interrupt the transmission of data without danger for the user.
 The internal battery for the PolyLink effort/position kit is recharged by the USB charger. In this
configuration, electromagnetic disturbances may temporarily interrupt the charge of the battery
without danger for the user.
Communication with the PolyLink kit
The communication of the S.Box device with the PolyLink kit is performed directly by the device.
When the PolyLink module is installed in the S.Box device, the following display appears in the
settings menu for the patient (see " How to set the device " in the patient manual).
View of the display:
Tap the touch key
as many times as
necessary
BLE communication (BLE = Bluetooth Low
Energy)
You can enable (ON) or disable (OFF) the
communication by tapping the key or
.
Possible Settings: BLE: ON and BLE: OFF.