SEFAM DreamStar Auto, Руководство для пациента

Страница: 11 / 42

DreamStar Intro, Info, Auto patient manual en GB – 11
5. The symbols that may be displayed on the screen are summarized in the table entitled "Description of
symbols displayed on the screen" on page 12.
6. If your device includes a water chamber and if the humidification function has been activated, the
heated humidifier automatically turns on. You can increase or decrease the heat level by
moving the arrow at the bargraph with the right or left parameter settings button, as shown hereafter.
WARNING
Following a power supply interruption, the device will resume the same mode it was in (on/off) before the
disconnection.
Stopping Treatment
1. Remove the mask.
2. Turn off the DreamStar™ product range device by pressing the On/Off button for several
seconds.
Mask unplugged feature
If you remove your mask, the device automatically switches to low power. The machine will restore normal
power when you reconnect your mask or if you press the On/Off button or the ramp button .
Otherwise, the device will stop after 30 minutes. This feature can be used at night if you need to get out of
bed.
Accessing the device menu
The four buttons on the front of the device allow you to access the device settings menu, scroll through
different pages, or possibly modify the value of certain parameters within these pages.
The parameters are accessible when the machine is in standby or operating mode.
The parameters that are accessible are grouped on several screen pages indicating:
•
device settings related to prescribed treatment
•
general device settings, such as date and time
•
recorded compliance data
•
reminders