16
|
TBA Evaporative Cooler
Display Number
Time Between Drains
05
1.3 hours
07 STANDARD 2 hours
11
4 hours
15
10 hours
PROGRAMMING THE WALL CONTROL
cont.
PROGRAMMING THE WALL CONTROL
cont.
DRAIN RATE ADJUSTMENT
If you installed the Drain Valve then the water will drain
when the sensor detects that the water salinity is too high.
Alternatively and if necessary, the air cooler can be set to
replace some water after a set time of cooling operation with
the following procedure.
1.
While the wall control is OFF, hold down AUTO for at least
3 seconds.
2.
Press
while pressing AUTO. “A1” displays.
3. Release Auto. Press
until “A6” displays.
4. Press
.
5. “00”will display. Press
until “01” displays.
6. Press
.
7. “A6”will display. Press
until “A8” displays.
8. Press
.
9. A number will be displayed. Press
or
until the
number displayed corresponds to the desired drain delay
time in the table below.
10. Press
to complete the adjustment. Exit the
programming mode by pressing the
button.
ILL1134-A
