30
IP App. Functions
This function is available only when the camera is connected.
Camera Network Settings
Tap the Network Setting icon
to enter the following page.
Camera Network Information
1
MAC Address is fixed for each camera.
DHCP Settings
Manual IP Settings
You can change the camera IP address, Subnet
Mask and/or Gateway.
2
3
Link-local Address
You can check the link-local address of the
camera.
4
Camera Ports
You can check the ports used for the camera’s
HTTP, HTTP and RTSP servers.
5
Misc.
MTU: You can set the packet size for the
transmission in network. This may be useful
to accommodate some routers to achieve the
best data rate.
6
When the error window is displayed.
The operation depends on camera network specifications as each manufacturer has different specifications.
When the IP address is not changed after modification.
The IP address will be changed once you reboot the camera.
When an error window is displayed.
The IP address will be changed once you reboot the camera.
Interface Type represents the current network
type of the connected camera.
Check the DHCP box to enable DHCP.
The automatically assigned address by a DHCP
server will be shown in the below address field.
Link-local address is not available for
modification.