29
IP App. Functions
Camera Settings
Tap the Camera Settings icon in the IP App. main page to test an IP camera.
Selecting one of the discovered camera in the Search page also opens Camera Settings as following.
1
2
3
4
6
7
8
9
5
10
No.
Name
Description
①
Device Type
Select your device type such as ONVIF, RTSP and MJPEG.
②
Set up
Connect the camera with the setting information entered below. Press this
button after completing the below setting information.
③
Camera Name
Enter a camera name as you wish.
④
Camera IP Address
Enter the IP camera address. If you are not sure about the IP address, you
can check the connection status by using the Ping button on the right side.
⑤
User Name / Password
Enter the user name and password of the credential used to connect the
camera.
⑥
Transport Protocol
Select a transport protocol between HTTP, TCP and UDP. HTTP is
recommended. If HTTP is not supported, this test monitor finds the
appropriate protocol automatically.
⑦
Overwrite RTSP Port
Specify the RTSP port value. This is not needed usually. It is useful only under
certain circumstances when port forwarding is involved.
⑧
Save
Save the configuration to the main page of the IP App.
⑨
Import
Enabled only when there are saved configurations. Import one of the saved
configurations.
⑩
Ping Test
Ping the connected camera and check the connection status.
⑪
Network Edit
Modify the network settings of the connected camera.
⑫
View Password
Display the entered password.
⑬
Full screen
Enabled only when the camera is connected. Check the video in full screen.
11
12
13