20
IP App. Functions
IP Camera Connection by a DHCP server
This is for connecting an IP camera to the monitor when a DHCP server or a router is connected and it
assigns an IP address to the camera and monitor automatically.
1
Tap the Monitor Settings icon in the IP App. main page to see the above page.
Monitor IP Settings Page
2
Select 'Advanced Configure' at the bottom of this page to open the monitor IP setting page.
'Use Ethernet' on the top of this page shall be marked all the time.
Cautions for IP address settings
When a DHCP server is configured, it
assigns an IP address to the monitor and an
IP camera.
When the camera IP address is set
manually, the camera will not be discovered
and connected.
This test monitor does not assign an IP
address to a camera. A DHCP server or a
router should be configured.
3
Mark DHCP and press OK. Then, all of the settings will be saved.
4
Move to the IP App. main page by pressing the back button or tapping the back ( ) icon at
the bottom of the screen.
Do not enter IP Address, Mask Address and
Gateway.
