12
Product Parts and Descriptions
Top Interface
1
2
3
4
5
6
7
8
9
10
No.
Name
Description
①
Power Connector
The exclusive adapter included in this package is only allowed to recharge
this test monitor. DC12V power supply for camera operation is also available
through this port by using the power output lead. There are 5,680 mAH Li-
Polymer batteries built in this monitor.
②
RS-485 Communication
Camera PTZ and OSD menu settings are available by RS-485 communication
function. In addition, data reception and analysis are possible in RS-485 Rx.
and Analysis modes.
③
HDMI Input/Output
HDMI input up to 1080p 60Hz resolution is possible, which is received from
external devices such as NVR or DVR. HDMI output in 1080p 60Hz resolution
is also possible.
④
HD-SDI(~3G) Input
HD/EX/3G-SDI video input is available and it can supply PoC (Power over
Coax) to PoC camera.
(PoC is optional)
⑤
IP Camera Connector
(RJ-45)
This test monitor can connect a network camera directly or via a Hub/Switch.
Also, it can supply PoE to a PoE camera.
⑥
NVR Connector
(RJ-45)
PoE voltage test is available through this port.
⑦
Video Input
AHD, TVI, CVI or CVBS input is available through this port and camera PTZ
and OSD menu settings are also easily implemented by UTC function.
⑧
USB Terminal
This test monitor supports USB 2.0 and supplies 5V power through this USB
port. Wi-Fi is available to use only when the USB LAN card is mounted on this
test monitor
⑨
Micro SD Card Slot
Standard Micro SD card can be mounted onto this test monitor and recorded
video can be saved on it. Also, it can be used for data transfer.
⑩
Power Switch
You can turn on/off this test monitor by pressing this power switch for around
three seconds, or set it to sleep mode by pressing this button for a second.
The batteries can be saved due to this sleep mode function(Automatically
power off after 10 minutes in its sleep mode)