2
Cautions for use of this product
If you give excessive shock to this product or drop it, LCD may be damaged. Therefore, have a special care
not to break it. (The damaged LCD is not available for free A/S even in warranty.)
Do not spray water directly and wipe this product gently with a dry towel when you clean it. Have a
special care for LCD shock during cleaning.
When using outdoors, be careful to prevent water or other foreign objects from entering this product.
(It may cause fire or malfunction of the product. In this case, free A/S is not available even in warranty.)
Do not apply power to video input connectors.
Do not install the product in the following places: extremely low or high temperature conditions; places
exposed to rain, snow, or high humidity; places containing or exposed to oil and gas; places exposed
to vibration and shock; places under direct sunlight or exposed to outdoor weather conditions; places
exposed to radio waves (RF) or near to power lines (for EX-SDI, HD-SDI). It may cause low performance or
malfunction of the unit.
Use exclusive adapter only for recharging the built-in batteries. Otherwise, it may cause fire or explosion.
(When the red LED of the adapter is flickering during recharging, please contact where you purchased
this product)
The warranty for the built-in batteries is for 6 months from the purchase date.
LI-Polymer Batteries (11.1v / 5,680mAh) are built in this product. Do not disassemble or short-circuit the
batteries. (Free A/S is not available in this case)
If the charger terminal is short-circuited or has the polarity in opposite way, the batteries may be
damaged.
Keep this product in the provided bag to prevent the main body and LCD from getting cracked.
Do not put any conductive materials such as screwdrivers, coins, metal parts, etc.
Do not place this product to where water is falling or splashing and where has water inside such as flower
vases.
Stop using this product immediately and contact where you purchased this product when any smoke or
smell is produced.
Do not disassemble this product on your own and contact where you purchase this product when it does
not work properly. (You do not have free A/S for any failure caused by your own decomposition)
When this product is left for a long time and discharged, connect to WI-FI. When WI-FI is connected, the
time is set automatically.
When Micro SD Card is bent or cracked, it may cause some problems.
When the life of Micro SD Card comes to an end, the video storage and playback are not available.
Reset it to factory defaults if the product is paused frequently or does not work properly.
Press and hold the power button for about 7 seconds to shut down this product forcibly when it is paused
during use or the touch pad or D-pad does not work properly. After then, please turn it on again for use.
Press and hold the power button for about 7 seconds to shut down this product forcibly when it is paused
during use or just after resetting to factory defaults. After then, please turn it on again for use