19
IP App. Functions
2) When connecting an IP camera manually (When you know the camera IP address)
1
Tap the Monitor Settings icon in the IP App. main page to see the above page.
Monitor IP Settings Page
2
Select 'Advanced Configure' at the bottom of this page to open the monitor IP setting page.
'Use Ethernet' on the top of this page shall be marked all the time.
Cautions for IP address settings
When connecting an IP camera manually, please
change the monitor IP address to the same
range of the camera IP address. Otherwise, the
camera will not be discovered and connected.
If the monitor and an IP camera have different
IP address ranges, the camera will not be
discovered. If you do not remember the camera
IP address, please reset it to factory defaults
and go to page 18.
DHCP is enabled when the monitor is connected
to a router or a server.
3
Enter the same values in the IP Address except for the last value as the connected IP camera's
IP address.
e.g.) Camera IP Address: 192.168.2.120, Monitor IP Address: 192.168.2.33
5
Move to the IP App. main page by pressing the back button or tapping the back ( ) icon at the
bottom of the screen.
4
Enter 255.255.0.0 in the Mask Address, enter the same values of the IP camera address in the
Gateway after changing the last value to 1, and press OK. Then, all of the settings will be saved.
e.g.) IP Address: 192.168.2.33, Gateway: 192.168.2.1