SEDLBAUER speed card, Руководство пользователя

Страница: 24 / 97

24 Manual ISDN Adapter - Startup /Software Installation for Windows 98
6 Software-Installation for Windows 98
6.1 Installing the CAPI driver
After you have installed your ISDN adapter as described in Section 4.2.1, 4.2.2, 4.2.3 and 4.2.4 you can
begin with the software installation for Windows 98.
These speed USB ISDN adapters like speed win PCI, speed star and speed USB are p
lug & play
adapters, i.
e. Windows 98 automatically identifies the adapter as a new hardware component. If you use „speed star“,
please note that the adapter must be plugged in!
Windows 98 interactively guides you through the installation. Have ready your Windows 98 CD, you will
possibly need it.
Caution:
For installation of speed card follow the instructions described under 6.1.1.
6.1.1 Installation of non
plug & play
ISDN adapters
•
Insert the Sedlbauer CD into the right drive.
•
Click “ Language ” and < Next >
•
In the next dialog box mark “ Capi driver ” and confirm with < Install >
•
Now the hardware assistant will be started.
•
Select “ No, I want to select the hardware from a list ”
•
Click on “ Next ”
•
Mark “ Other devices ” and click on the < Next > button.
•
Click “ Have Disk ”
•
Enter the following path for installation:
•
Example for installation from CD-ROM drive D:
•
D:
•
Confirm with “ OK ”
•
Now, mark the “ ISDN adapter ISA ” and click < Next >
•
Note the interrupt as well as the I/O address suggested and click < Next >.
Sedlbauer AG configuration will be started with the dialog box below (see figure 6.1.1.1).
•
In this dialog box you can
select the language you wish
to guide you through
installation.
Confirm with “
OK ”.
Figure 6.1.1.1