Sedgwick PT255, Дополнительные инструкции по установке, эксплуатации и обслуживанию

Страница: 8 / 40

8
• Risk of injury through accidental contact with the rotating cutterblock –
do not attempt to
remove any guarding from the machine during machining;
• Risk of injury due to ejected workpieces;
• Risk of injury from workpiece kickback when surface planing;
• Hearing damage as a result of exposure to high noise levels – take precautions;
• Damage to lungs due to the inhalation of dust, which can vary when working with different
types of wood/wood with varying moisture content.
Always stop the machine when it is unattended.
2.0 Machine Handling
The following section offers a guide to transporting, assembling and installing the machine,
which should be done following an adequate risk assessment. Movement, adjustment or
installation of the machine should not be attempted without proper training in the handling of
heavy machinery.
There is a risk of physical injury when moving the machine. The machine could
be damaged or written-off if not handled properly during transportation.
The machine dimensions and weights are as follows:
DIMENSIONS - Length x Width x Height 1400 x 800 x 1160
MACHINE WEIGHT
Total Weight, including Packing Crate 170 Kg
262 Kg
Always use a sling or hoisting device equipped with safety hooks within the safe working load of
the machine weight. Check the sling is in good condition before starting the handling operation.
Before lifting, place a piece of wood onto the thicknessing bed, sufficiently long to lock up
against the cutterblock (ensure that it does not foul the knives) and both feed rollers. Wind the
bed up using the Thicknessing Rise and Fall Handwheel until the wood is locked firmly in
position. Sling underneath the machine’s thickness table extension rollers. Do not walk or stand
under the machine during lifting.