46
4. List Bypass
A list of devices may be bypassed using this option. The user is prompted to enter the loop
number associated with these devices.
Next enter the address list of devices you wish to bypass. Use the following symbols to enter
the address list:
The message displayed if the current address carries no device is as follows:
The following message is displayed to bypass.
If the device is already bypassed the message is as follows.
If the exclamation is not used, then there will be individual confirmation.
At the end of the bypass operation or if the exclamation is used, the message displays:
Table 10 List Bypass Special Characters
Symbol
Number of times to
press “1” key
Description
-
2
Sets the interval of consecutive addresses, e.g. 1-7.
,
3
Separates the addresses of the devices
!
4
Placed at the end of list to signify that no individual
confirmation is required.
Loop number
Loop :__
