V2.0 7-31-12
14
【SYSTEM SETTING】
【CAMERA
PARAMETERS】
【PAN TILT SETTING】
【DISPLAY]
Under
[SYSTEM SETTING]
choose
[SYSTEM INFORMATION]
and press
[OPEN]
to confirm the
selection. The dome’s present system information will be shown on the screen
。
CAMERA PARAMETERS
MAIN MENU CAMERA PARAMETERS
LENS PARAMETER
Use this menu to set the camera's zoom speed, electronic zoom, and focus and preset points limit.
CAMERA PARAMETERS LENS PARAMETER
z
ZOOMING SPEED
)
Procedure:
1. Call preset 95 to enter the main menu.
2. Use the up/down PTZ controls to choose
[CAMERA PARAMETERS]
item, press
[OPEN]
to
confirm the selection and enter
[LENS PARAMETER]
menu
.
3. Under
[LENS PARAMETER]
choose [
ZOOMING SPEED
] item and press
[OPEN]
to confirm
the selection and the parameter setting will blink.
4. Up/Down P/T to change the value.
5. Press
[OPEN]
to save and exit this item setting; Press
[CLOSE]
to exit immediately without
saving.
z
DIGITAL ZOOM SETTING
)
Procedure:
1. Call preset 95 to enter the main menu.
2. Use the up/down PTZ controls to choose
[CAMERA PARAMETERS]
and press
[OPEN]
to
confirm the selection, then enter
the
[LENS PARAMETER]
menu
.
3. Under
[LENS PARAMETER]
choose [
DIGITAL ZOOM
] and press
[OPEN]
to confirm the
selection and enter electronic zoom set. The setting will blink.
4. Up/Down P/T to choose ON or OFF.
5. Press
[OPEN]
to save and exit this item setting; Press
[CLOSE]
to exit immediately without
saving.
z
FOCUS LIMIT SETTING
Use this to limit the focal distance of the camera in order to improve the performance of the lens
focus. For example: With a minimum focus distance of 1 meter, the camera will not try to focus on
dust, dirt, water etc. on the camera dome itself.
)
Procedure:
→ ZOOMING SPEED :
HIGH
DIGITAL ZOOM : ON
FOCUS LIMIT : 30cm
→ 【LENS PARAMETER
】
【EXPOSURE MODE】
【WHITE BALANCE】
【BACKLIGHT MODE】
→ 【LENS PARAMETER
】
【EXPOSURE MODE
】
【WHITE BALANCE】
