V2.0 7-31-12
26
ALARM LINKAGE
This function is used to select which action is taken by the camera when an alarm input is triggered.
E.g., Auto Scan 1 thru 4
，
Preset Point 1 thru 200, Sequence 1 thru 4 etc.
)
Procedure:
1. Call preset point 95 to enter the main menu.
2. Use the Up/Down cursor to choose
[ALARMS SETUP]
and press
[OPEN]
to confirm the
selection and enter Alarms Setup.
3. Under
[ALARMS SETUP]
choose
[ALARM LINKAGE]
and press
[OPEN]
to confirm the
selection.
4. Use the Left/right P/T controls to change alarm function linkage, E.g, Auto Scan 1 thru 4
，
Preset Point 1 thru 200, Sequence 1 thru 4 etc
5. Press
the
[OPEN]
key to save and exit. Press the
[CLOSE]
key to exit directly without saving.
RELAY (AUX) OUTPUT
This sets whether or not to link the alarm output relays to alarm events generated by the camera.
Note:
The alarm output relays are configured for N.O. (Normally Open) operation. Please
ensure all equipment for use with the alarm outputs can be configured for N.O. operation.
)
Procedure:
1. Call preset point 95 to enter the main menu.
2. Use the Up/Down cursor to choose
[ALARMS SETUP]
and press
[OPEN]
to confirm the
selection and enter alarm set items.
3. Under
[ALARMS SETUP]
choose one of the 2 alarm inputs to link to a relay (AUX) output.
4. Select
[RELAY OUTPUT]
and press
[OPEN]
to confirm the selection.
5. Use the Up/Down P/T controls to choose relay output 1, 2 or off.
6. Press
the
[OPEN]
key to save and exit. Press the
[CLOSE]
key to exit directly without saving.
RESET DELAY
This function sets how long an alarm takes to reset itself after it has been triggered. The time range
is 1-255 seconds.
)
Procedure:
1. Call preset point 95 to enter the main menu.
2. Use the Up/Down cursor to choose
[ALARMS SETUP]
and press
[OPEN]
to confirm the
selection and enter alarm set items.
3. Under
[ALARMS SETUP]
choose
[RESET DELAY]
and press
[OPEN]
to confirm the
selection.
4. Use the Left/right P/T controls to change the rest time. 1-255 seconds can be selected.
5. Press
the
[OPEN]
key to save and exit. Press the
[CLOSE]
key to exit directly without saving.
