background image

PACKAGE CONTENTS 

 

This package contains: 
 

One ST-PTZIR480-22X high-speed intelligent dome color camera. 
One mounting bracket. 
One 24VAC 3A power supply. 
One installation manual. 

 

 

PRODUCT DESCRIPTION 

 

The ST-PTZIR480-22X is a professional grade infrared intelligent dome color camera with pan, tilt and zoom (PTZ) 
capability and 480TVL resolution. The camera’s non-volatile digital memory allows the saving of all settings. Its 
200 preset positions provide versatility for cruise routes and tour functions. The ST-PTZIR480-22X’s mechanical 
design permits continuous horizontal 360

°

 rotation and 90

°

 vertical flip. Temperature management is built-in. 

 
 

Functions and Features 

Non-volatile design ensures data will not be lost if power fails. 
Recovery function allows the camera to continue previous functions after power is restored. 
Support for 200 presets and 4 preset tours, each containing up to 32 presets. 
4 patterns, each can be recorded for 1000 discrete PTZ controller moves. 
Support for 4-auto scans. 
Soft and hard ID settings can be edited on the DIP switch or via the OSD menu. 
Integrated multi-protocol control: PELCO“P”, PELCO“D”. 
2 ch alarm input; 2 ch alarm relay output.  
Proportional zoom lens; P/T speed will decrease in proportion with depth of zoom.

 

Can be installed indoors or outdoors. 
Horizontal pan speed 0.5º-82º/s. 
Vertical tilt speed 0.5º-30º/s. 
360º continuously horizontal rotation. 
Complies with IP 66/CE standard. 
Built-in surge protection circuitry. 
Auto focus, manual priority. 
Auto iris. 
Auto shift from Color to B/W. 
Built-in OSD makes it easy to configure all settings of the camera. 
Built-in display for the internal dome temperature, preset status and compass direction. 

      330ft IR distance for long-range surveillance. 

 

 

 

 

 

 

Содержание ST-PTZIR480-22X




























Отзывы: