Security Tronix ST-DVR8716BG, Руководство пользователя

Страница: 23 / 92

v2.0 11/8/11 23
Auto Recording – Video Blind
When the video image is lost, such as the camera being covered, the Video Blind function can be
turned on and linked to an alarm function.
a. Go to Main Menu , click on the Alarm icon and then the Video Blind icon. A Video Blind
setup screen similar to the one below will appear. The Video Blind setup screen and
parameters are very similar to those for motion detection.
b. CHANNEL – Select the camera from the drop-down menu.
c. ENABLE – Highlight the checkbox if the Video Blind function is to be enabled.
d. SENSITIVITY – Select from the six levels of motion sensitivity from the drop-down menu.
e. PERIOD – To set the day and time period for the video blind to take place click SET and a
Set Screen will appear. Select the desired day from the drop-down menu or ALL for the
entire week. Four possible time slots are available for each day. Use the mouse and soft
keyboard to enter the required time periods. Upon doing so the graphic will adjust to
indicate the selected days and time periods. When done, click
OK .
f. ALARM OUTPUT – If an external signal (e.g., bell) is to be activated upon a video blind
event highlight the checkbox.
g. DELAY – Period during which the alarm sounds after the alarm input returns to standby
status. Set a delay in the range of 10 to 300 seconds.
h. RECORDING CHANNEL – Select one or multiple recording channels for the video signal
when the alarm is activated.
i. TOUR – Upon a video blind or other alarm event the monitor will display a single window
beginning with the channel on which the alarm took place. If desired, additional single
windows per channel will sequence. The sequence interval is set by going to
Main Menu ,
clicking on the System icon, clicking on the Tour icon and entering the interval period in
seconds.