Security Tronix ST-DVR7204G Скачать руководство пользователя | Manualshive

Страница: 6 / 89

background image

v2.0 11/8/11

6

INSTALLATION

CAUTION:  To  reduce  the  risk  of  electrical  shock,  only  remove  the  cover  after
disconnecting  all  power  to  the  unit  and  only  to  install/remove  the  hard  disk  drive.  There
are no user serviceable parts inside the unit.

CAUTION:    To  prevent  electric  shocks  and  risk  of  fire  hazards,  do  not  use  other  than
specified power source.

This DVR has been designed for indoor use only. Outdoor use voids warranty and poses

serious electrical and fire hazard risks to the installer, user and facility.

1. UNPACKING and HANDLING

Each unit is shipped assembled and factory tested.

Ensure that all accessories are removed from the container before discarding packing material

2. MECHANICAL INSPECTION

Inspect the front and rear of the equipment for shipping damage. Make sure the equipment is
clean, and no connectors are broken, damaged, or loose. If equipment appears to be
damaged or defective please contact your distributor or Securitytronix at 1-610-429-1511 for
assistance.

3. SPECIAL ATTENTION

a.  The installer must comply with electrical safety standards.
b.  This DVR is for indoor use only and must be installed in a safe, ventilated and dry area.
c.  Open the DVR case only to install the hard drive(s). There are no serviceable parts inside

the unit.

d. If liquids spill inside the DVR’s case immediately turn off all power to the unit, disconnect

the unit from its power source and have a qualified technician check it for damage.

e. Do not install the DVR in an environment where the temperature is above 104

°

F.

f. Only use a dry cloth to clean the unit. If there is dirt that is difficult to remove wipe gently

with a mild detergent. Never use strong or abrasive detergents.

g. A minimum 12VDC 5A power supply must be used. AC power cannot be applied. Using

an AC or other incorrect power supply will damage the unit.

h. Only qualified installers are allowed to install, test and disassemble the DVR.
i. As the DVR is a sensitive device any shock or other shaking of the unit will cause damage

and void the warranty.

This symbol is intended to alert the user to the presence of important operating and
maintenance (servicing) instructions.

This symbol is intended to alert the user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a
risk of electrical shock.

«
...
4
5
6
7
8
...
»

Содержание ST-DVR7204G


























































































Отзывы:

Нет отзывов

Похожие инструкции для ST-DVR7204G

Бренд: Magnavox Страницы: 104

Бренд: Falcon Страницы: 6

Бренд: OCB Страницы: 60

Бренд: Grandbeing Страницы: 71

DVR-HSD4000 Series

Бренд: Genesis Страницы: 79

Бренд: urmet domus Страницы: 152

Бренд: Techpro Страницы: 198

Бренд: Argus Страницы: 65

Бренд: Mitsubishi Electric Страницы: 2

16-channel models

Бренд: Ness Страницы: 97

Бренд: Clinton Electronics Страницы: 30

Бренд: Idis Страницы: 24

Kollector Elite

Бренд: Vicon Страницы: 24

Бренд: D-Teg Страницы: 56

HDMI HD VIDEO CAPTURE PRO

Бренд: J.S. Technology Страницы: 4

NVR1A-4P Series

Бренд: Dahua Страницы: 470

DVMRe -16CS Simplex

Бренд: GE Security Страницы: 92

Бренд: Pelican Страницы: 64

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды