Security Tronix ST-DVR7204G, Руководство пользователя

Страница: 14 / 89

v2.0 11/8/11 14
If the DVR is recording (normal recording or time recording) at the time the unit is turned off the
DVR will automatically save the recording before shutting down. When the DVR is powered back
on it will automatically revert to that recording condition prior to it being turned off.
2. ACCESSING SYSTEM MENU
There are several methods for accessing the DVR’s menus:
a. Press the button on the DVR’s front panel for the Main Menu .
b. Click the Mouse’s Right Key for the pop-up Short-cut Menu .
c. Press the PLAY button on the DVR’s front panel for the Video Playback Toolbar and
Recording Search window.
d. Press REC on the DVR’s front panel or remote control for the Record Mode window.
e. Press PTZ on the DVR’s front panel or remote control for the PTZ Control window.
Menus may also be accessed using the infrared remote controller’s buttons.
Use
ESC to exit any operation.
The ability to access menus and make menu selections will depend upon the user’s access rights
as described below.
3. USER ACCESS RIGHTS
There are 2 default access settings from the factory:

Admin – Top authority with all privileges/permissions.
 Guest – Privileges/permissions limited to preview and video playback.
Admin and User privileges/permissions cannot be changed. However, their passwords can be
modified.
In addition, there is a Default user whose privileges/permissions are initially limited to preview and
video playback. However, default privileges/permissions and passwords can be set and modified
on a user-by-user basis.
Out of the box, Admin , User and Default have no passwords. Passwords and
privileges/permissions by going to Main Menu , Advanced and Account .
After setting account passwords password protection goes into effect. If a password is wrong three
consecutive times an alarm will start. If the password is wrong five consecutive times the account
will be locked. Locked accounts will automatically be unlocked 30 minutes or manually unlocked
by rebooting the DVR.
User selection is done through the drop-down menu. Password input is accomplished using the
Mouse Left Key and soft keyboard.