● Create an outline using the desired parameters under "Create a cutting contour". Confirm it
by clicking "Accept".
● Now open the Contour Cut Wizard. Make sure that "LAPOS Q" is selected. Now you can
print or save the graphics you've created. Ensure that the printer is configured to print it
using the actual size and doesn't scale it.
● In the next step, the saved cut job must be added. To do this, simply click "Add Cut Job".
DrawCut PRO will now automatically assign a job ID, which is stored in the software and
can be called at any time, either by reading the bar code or by manually loading the job ID.
Secabo GmbH | Hochstatt 68 | 85283 Wolnzach | Germany | [email protected] | www.secabo.com
18
