Secabo T120 II, Руководство по эксплуатации

Страница: 21 / 26

● Prior to first use, a one­time measurement of the vinyl cutter's maximum media width must
be performed. To do this, you must click on "Recalibrate" and then click on "OK" to start the
process. This process may take several minutes.
● Now place the film in the vinyl cutter and set the zero point at the desired location. Confirm
your zero point by clicking the button "right". Next, click "Detect". The plotter will now search
for the left edge of the film.
Secabo GmbH | Hochstatt 6­8 | 85283 Wolnzach | Germany | mail@secabo.com | www.secabo.com
21