The first cut job
● Start the cutting software DrawCut PRO.
● Create a logo or a graphic using the text tool and click on the knife holder icon in the menu
bar above.
● The menu "Send to cutting plotter" appears, click on "Cut" in the lower right section of the
window.
● Now, the "Vinyl Spooler" opens and displays a preview of the cut job on the right side.
Now click on "Cut" and confirm the question with "Yes".
● Start the cutting process!
● The plot can be stopped with the "pause" button at any time,
for example allowing you
to adjust knife settings while still in the cut job.
● You can use the "OK" button to continue to run the cut job.
Settings and operation
Moving the cutting head
Pressing the arrow keys lets you move the cutting head left or right, as well as transport the film
forwards or backwards. The corresponding X and Y coordinates are shown on the display.
Setting the zero point
To set the correct starting point for cutting, move the cutting head and film using the arrow keys, so
that the knife is located in the front right corner of the film. Now confirm this zero point by pressing
"OK".
Secabo GmbH | Hochstatt 68 | 85283 Wolnzach | Germany | [email protected] | www.secabo.com
12
