sebaKMT Easyflex Com, Инструкция по эксплуатации

Страница: 49 / 57

MAN_Easyflex_com_eng_01.doc 49
4.3 Troubleshooting
The green indicator lamp does not light up after the unit has been
plugged into a mains outlet.
−
Check the cable and connector for being firmly in position.
−
Is the mains outlet live ?
The amber LED does not light up continuously although there is a
accumulator in the charger.
−
Shortly disconnect the charger from the mains or on-board network.
−
Has the accumulator been inserted properly (refer to Start-Up) ?
−
Has the accumulator been pushed into the charger down to the stop ?
−
Is the accumulator out of order ?
In case none of these hints allows you to solve the problem, please submit
the device to your service station for inspection or contact the Hagenuk
KMT hotline.
5 CARE UND MAINTENANCE
Neither the
Easyflex Com
nor any of its accessories contain components
which require regular care and maintenance to keep them operational.
Submit the
Easyflex Com
or its accessories to your service shop or to
Hagenuk KMT for repair should any defect occur.
Never use any aggressive solvent or detergent for cleaning your
Easyflex
Com
and its accessories. Use a soft, dry cloth for cleaning your
Easyflex
Com
and its accessories. When the device is very dirty, moisten the cloth
with some mild soap (do not use any abrasive agents) and clean it. Make
sure that all traces of moisture have evaporated before the
Easyflex Com
and its accessories are used again.