sebaKMT Easyflex Com, Инструкция по эксплуатации

Страница: 45 / 57

MAN_Easyflex_com_eng_01.doc 45
4.1.2 Start-Up
First connect the cable from the plug-in mains unit to the DC-IN 12 V
socket of the charger, and only then plug the mains unit into a mains outlet
(see Fig 13).
The green LED of the charger case should now be on continuously, while
the amber LED should flash up at regular intervals.
Now insert the appropriate NiMH rechargeable accumulator into the
charger case until it engages gently.
Please make sure that the accumulator contacts face the direction of the
LEDs because this is the only way contact is made to the electronic
charger circuit (see enlarged details).
The amber indicator lamp shall light up continuously after the accumulator
has been inserted. If it does not, shortly disconnect the charger from the
mains.
After charging has been completed (approx. 3.5 hours), the amber LED will
flash again. You may now remove the accumulator or leave it in the
charger.
Disconnect the charger from the mains whenever you intend not to use it
for an extended period of time. To do so, just unplug the mains unit from
the mains outlet - you need not disconnect the cable from the mains unit to
the DC-IN 12V socket of the charger. We suggest to install the charger
close to an easily accessible mains outlet.
Charger case
Plug-in mains unit
DC-IN 12 V
mains
Fig 12 Connection to a Mains Outlet
green
and
amber
LEDs