SEAWARD Electronic Test 'n' Tag, Инструкция по эксплуатации

Страница: 8 / 24

4. Updating the Tester
If you have PATGuard Plus it is necessary to update your
PATGuard Plus program with the program supplied to use the
Test ‘N’ Tag system.
If you have PATGuard then you will need to obtain a PATGuard
Plus update from Seaward Sales Dept.
If you use PATSLite and the version number is less than 1.3 you
will need to obtain a new PATSLite program from Seaward Sales
Dept.
Once PATGuard Plus has been installed, update your tester by
running the Tester Software Update program. Both utility programs
are started from Windows Start and are found in the Seaward
PATGuard Plus group (from where the PATGuard Plus program can
be launched).
Connect from the tester serial port to the PC serial port with the
Download Lead supplied (has two ‘D’ type connectors either end, one
male one female).
Run the Tester Software Update program. The following screen is
displayed:
6