SEAWARD Electronic Test 'n' Tag, Инструкция по эксплуатации

Страница: 19 / 24

7. Adding a Logo to the Label
Enter up to 29 characters for the label title in the User defined text.
Note
This label title change will also occur on Roll printer Pass / Fail labels
(see tester Instruction Manual for Roll printer information).
If no logo is required set Test ‘N’ Tag Logo to None – leave blank .
Ensure the correct Com Port is set then press the Transfer… button.
Put the tester into REMOTE MODE (see tester Instruction Manual)
then select OK. The label title will then be transferred into the tester.
Test ‘N’ Tag Logo
The program allows you to select a logo to transfer to the tester.
Three example logos are supplied with the program. Any one of
these can be transferred to the tester or they could form the basis of
your own logo design using a suitable Windows application.
17