SEAWARD Electronic Test 'n' Tag, Инструкция по эксплуатации

Страница: 22 / 24

8. Parts List
•
No Interface cable connected.
•
Printer not switched on
Printer Error: Incorrect Printer Type
The following message is displayed:
--------------WARNING---------------
PRINTER ERROR:INCORRECT PRINTER TYPE
PRESS THE START KEY TO TRY AGAIN, OR
PRESS THE ABORT KEY TO ABANDON THE
PRINTOUT.
The printer is not a Test ‘N’ Tag printer.
Note
ONLY Kroy K3000PC printers supplied by Seaward as part of the
Test ‘N’ Tag system are compatible with Seaward testers.
Poor Quality Print
Please ensure that the Supply Cartridge has been installed correctly.
See section 2 Installing the Supply Cartridge earlier in the manual
particularly:
3 On the bottom of the cartridge, turn the ribbon advance one
full turn counter clockwise (follow arrows on cartridge) or until
any slack in the ribbon is removed.
THIS IS VERY
IMPORTANT.
These instructions are also on the Supply Cartridge packaging.
8. Parts List
Item Part Number
20